Services
DIMENSIONAL METROLOGY LABORATORY
1) Calibration of instruments
2) Job Inspection
3) Dimensional verification of Tools, Profile
3) Training
5) R&D
DML Lab offers a wide range of calibration services under NABL scope :
- Vernier Calipers
- External Micrometer
- Inside Micrometer
- Dial Gauges(Plunger/ Lever type)
- Height Gauges
- Feeler Gauges set
- Measuring Scale
- Measuring Tape
- Bore Dial Gauge
- Bevel Protector
Other than above mentioned instruments we are calibrating a lot of instruments/Gauges without NABL certificate like:
- Plain Plug Gauges
- Plain Ring Gauges
- Pin Gauges
- Snap gauges
- Thickness Gauges
GIVE US A CALL to learn more about our full list of calibration services.
Apart from the calibration activity DML lab is providing the Dimensional inspection facility to our customers by means of high precision inspection techniques like:
2 Dimensional Universal Measuring System :- Microrep Model MIL 201. This is a machine attached with the Metrological microscope and digital readout Equipment “Quadra Check 2000” having resolution 0.001 mm for two co-ordinate measurement of external threads, internal threads, blind or through holes, taper, profile angles, circles and radii. The machine is designed to give an effective support to the verification and calibration of internal Micrometers, Dial Indicators, Micrometer Heads, Bore Gauges, Snap Gauges etc. This helps to achieve the quality requirements of the components manufactured in order to comply the requirements of ISO-9000.
Machine Capabilities : This includes different measuring methods both Contact and Non-Contact types, Profile comparison, the measuring range being X = 200 mm & Y = 100 mm, the working stage with an area of 800 x 240 mm, max. load up to 40 kg. adjustable centre cradle up to 750 mm, V-type supports adjustable up to 850 mm. The Tilting head has an angular movement of ± 15° for sharp focusing both with flanks of external threads. The microprocessor based digital readout system offers a resolution of 0.001 mm permitting a wide range of linear and circular calculations. PC-based software is coupled to facilitate gauge management.
1. Electronic Height Gauge : Tesa Make Electronic Height Gauge is having least count
of 0.0001mm specially designed for length measurement in the form of internal, external,
height, depth and distance dimensions on geometrical elements having either a flat,
plane-parallel or cylindrical surface.
Also able to capture the position of bores in two directions of co-ordinates with
further output in either Cartesian or polar system. Their measuring capabilities
can be increased with the use of an inductive probe that can be connected for the
detection of perpendicularity errors.
2. Electronic Dial Calibration Tester : The machine is having the least count of 0.0001mm and Used for calibration of plunger type,lever type Dial gauges and bore gauges. The unit is computer interfaced with a user-friendly software for statistical analysis of measured values. The range of the instrument is 0-25mm and it is suitable for all types of dial gauges and bore gauges with lowest Least Count.
